Skip to main content

Changes to Step #13

Edit by icjoinery

Edit approved by Chandler Skinner

Deleted
Added
Unchanged

Step Lines

[* black] Removing the top half.
[* red] Flip the console over and remove the 6 T10 Screws. They should each be 32.5" long, if not, you removed the wrong screws.
[* red] Flip the console over and remove the 6 T10 Screws. They should each be 32.5" long, if not, you removed the wrong screws.
[* black] Then flip the console back over, holding it by both the plastic and the metal.