Skip to main content

Changes to Step #7

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* icon_note] The LCD is glued to the metal LCD shield plate behind it along the top, left, and right edges. In order to safely loosen this adhesive, you'll be using a guitar pick to shift the LCD a couple of millimeters left and right several times.
+[* black] Insert a guitar pick into the gap between the LCD and rear case, near the top of the left side of the LCD.
+[* black] Bend the pick slightly away from the iPad, just enough to spread the gap between the LCD and rear case.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Deleted