Skip to main content

Changes to Step #1

Edit by tekjew

Edit declined by Scott Havard

Before
After
Unchanged

Step Lines

[* icon_note] The camera bracket is attached to the front panel by adhesive. The use of an iOpener to soften the adhesive is highly recommended.
[* black] Follow the iOpener heating instructions described in the iOpener heating section at the beginning of this guide.
[* icon_caution] Be careful not to overheat the iOpener during the repair procedure. We recommend waiting at least two minutes before reheating the iOpener.
[* icon_reminder] Place the iOpener over the front facing camera on the front edge of the top of the display.
+[* icon_note] ''iFixIt Full Assembly Fix Kits include the camera bracket premounted; it is not necessary to remove and reuse your old one.''