Skip to main content

Changes to Step #10

Edit by Jake Devincenzi

Edit approved by Jake Devincenzi

Deleted
Added
Unchanged

Step Lines

[* black] Insert wisdom hereThe bracket holding the hard drive in place is oddly flimsy and is held to the outside of the drive with a weak layer of adhesive.
[* black] This design change is far different from what we've [guide|5485|seen before|stepid=24092], and we assume it was made to reduce the size of the device
.
[* black] Insert wisdom hereThe bracket holding the hard drive in place is oddly flimsy and is held to the outside of the drive with a weak layer of adhesive.
[* black] This design change is far different from what we've [guide|5485|seen before|stepid=24092], and we assume it was made to reduce the size of the device
.