Skip to main content

Changes to Step #3

Edit by Francis

Edit approved by Francis

Deleted
Added
Unchanged

Step Lines

[* black] Remove the tape that cover the connector.
[* black] Here on the picture you can see the connector with his two holders (red squares) unlocked. They hold the wire in the connector and they are supposed to be completely pushed onto it.
[* black] Try to push the wire into the connector the most you can to be sure it is correctly plugged.
[* black] Push the holders (red squares) completely into the connector.
[* black] I suggest to put a better tape on the connector to ensure it never unlock itself again.