Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #8

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* black] PlaceTake the iOpener acrossfirst pick you inserted and slide it up toward the bottom ontop corner of the iPad, after reheating it for 30 seconds if it has cooled downiPad.
[* black] Letred] If you can see the iOpener sit for at least 90 seconds, to warm and softentip of the adhesive beneathopening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this section ofas it may deposit adhesive on the front panelof the LCD that is difficult to clean off.
[* black] PlaceTake the iOpener acrossfirst pick you inserted and slide it up toward the bottom ontop corner of the iPad, after reheating it for 30 seconds if it has cooled downiPad.
[* black] Letred] If you can see the iOpener sit for at least 90 seconds, to warm and softentip of the adhesive beneathopening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this section ofas it may deposit adhesive on the front panelof the LCD that is difficult to clean off.

Image 1

Old Version

New Version

Image 2

No previous image

Added

Image 3

No previous image

Added