Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #5

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* icon_note] Place the iOpener back along the right edge of the iPad and wait about a minute for it to warm the adhesive back up.
[* black] Insert a guitar pick 1/4" into the crack between the front panel and the rear case, to the left of the plastic opening tool.
[* icon_note] The guitar pick will serve as a placeholder, to keep the gap spread open so the adhesive doesn't reseal the iPad shut as you move the plastic opening tool.
[* icon_note] The guitar pick will serve as a placeholder, to keep the gap spread open so the adhesive doesn't reseal the iPad shut as you move the plastic opening tool.
[* icon_caution] Be careful not to insert the guitar pick too deep, as it could scratch and damage the front of the LCD.