Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #3

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* black] RemoveCarefully place a suction cup halfway up the iOpener from the iPad.
[*
heated side.
[*
black] Place a suctionBe sure the cup is completely flat on the bottom right of the front panel glass, just above the lower bezel and near the right edge of the devicescreen to get a tight seal.
[* black] WithWhile holding the iPad down with one hand on the devicehand, pull up on the suction cup enough to open a small gap betweenslightly separate the front panel glass andfrom from the rear panelcase.
[* icon_caution] Be careful to only lift the glass enough to insert an opening pick—any more and you may risk cracking the glass
.
[* black] RemoveCarefully place a suction cup halfway up the iOpener from the iPad.
[*
heated side.
[*
black] Place a suctionBe sure the cup is completely flat on the bottom right of the front panel glass, just above the lower bezel and near the right edge of the devicescreen to get a tight seal.
[* black] WithWhile holding the iPad down with one hand on the devicehand, pull up on the suction cup enough to open a small gap betweenslightly separate the front panel glass andfrom from the rear panelcase.
[* icon_caution] Be careful to only lift the glass enough to insert an opening pick—any more and you may risk cracking the glass
.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

No previous image

Added