Skip to main content

Changes to Step #32

Edit by Arthur Shi

Edit approved by Arthur Shi

Deleted
Added
Unchanged

Step Lines

[* black] Lay the replacement battery pack on top of the extended Battery Blocker.
[* black] Allow the battery pack to slide in place underneath the logic board as the battery's contacts clear the screw post.
[* icon_caution] If the battery pack's contacts do not slide into place, the contacts may be caught on the logic board's spring contacts. Slide the battery back out, lift one side of the logic board slightly higher, and try again.
[* black] Remove the Battery Blocker.