Skip to main content

Changes to Step #31

Edit by Arthur Shi

Edit approved by Arthur Shi

Deleted
Added
Unchanged

Step Lines

[* black] InsertSlowly insert the extended Battery Blocker under the logic board.
[* icon_caution] If you feel any resistance, the Battery Blocker may have caught on one of the contact springs. '''Do not push any further. '''Remove the Battery Blocker, lift the board up slightly, and try again.
[* black] InsertSlowly insert the extended Battery Blocker under the logic board.
[* icon_caution] If you feel any resistance, the Battery Blocker may have caught on one of the contact springs. '''Do not push any further. '''Remove the Battery Blocker, lift the board up slightly, and try again.
[* black] Lever the tool so that the the Battery Blocker's prongs barely push the logic board above the screw post.