Skip to main content

Changes to Step #29

Edit by Arthur Shi

Edit approved by Arthur Shi

Deleted
Added
Unchanged

Step Lines

[* icon_note] The goal is to lift the battery contacts high enough such that they clear the screw post underneath the logic board.
[* icon_note] The goal is to lift the battery contacts high enough such that they clear the screw post underneath the logic board.
[* black] Slowly lever the battery disconnect tool upwards, pushing the battery contacts and the logic board up.
[* icon_note] The logic board is held to the rear case with strong adhesive. Try to lift just enough to loosen the adhesive surrounding the connector.
[* icon_caution] Do not lift the logic board up to the point where the top and bottom edge of the logic board separates from the case.
[* black] Once the battery disconnect tool has lifted the battery contacts high enough to clear the screw post, pull the battery out of its position.
[* black] Remove the battery and the battery disconnect tool.