Skip to main content

Changes to Step #28

Edit by Arthur Shi

Edit approved by Arthur Shi

Deleted
Added
Unchanged

Step Lines

[* black] Slide the battery disconnect tool underneathunder where the battery's contactsbattery contacts the logic board.
[* icon_note] When donepositioned correctly, the disconnect tool's prongs should rest under both the logic board and the battery contacts. They should also surround a screw post.
[* black] Slide the battery disconnect tool underneathunder where the battery's contactsbattery contacts the logic board.
[* icon_note] When donepositioned correctly, the disconnect tool's prongs should rest under both the logic board and the battery contacts. They should also surround a screw post.