Skip to main content

Changes to Step #26

Edit by Arthur Shi

Edit approved by Arthur Shi

Deleted
Added
Unchanged

Step Lines

[* black] Slide an opening pick underneath the mid-battery circuit board, near the Smart Connector.
[* black] Carefully slice underneath the board around the post to release itthe board from the rear case.
[* icon_note] There is a post which protrudes from the case. Slice around the post.
[* black] Carefully slice underneath the board around the post to release itthe board from the rear case.
[* icon_note] There is a post which protrudes from the case. Slice around the post.