Skip to main content

Changes to Step #16

Edit by Arthur Shi

Edit approved by Arthur Shi

Deleted
Added
Unchanged

Step Lines

[* black] Slide a plastic card into the bottom edge of the battery until you feel the resistance of an adhesive stripbattery.
[* black] Apply slowPush slowly and firm pushing pressure to the plastic cardfirmly. Gently wiggle and twist the card to help it slice through the adhesive.
[* black] Slide a plastic card into the bottom edge of the battery until you feel the resistance of an adhesive stripbattery.
[* black] Apply slowPush slowly and firm pushing pressure to the plastic cardfirmly. Gently wiggle and twist the card to help it slice through the adhesive.
[* icon_note] If you are struggling, tilt the iPad, apply a few more drops of adhesive remover and wait a minute before trying again.
[* icon_note] As you are slicing, the Battery Blocker may fall out of position. If that happens, reposition the Battery Blocker before continuing with your work.