Changes to Step #16
Edit by Arthur Shi —
Edit approved by Arthur Shi
- Before
- After
- Unchanged
Step Lines
[* black] Slide a plastic card into the bottom edge of the battery until you feel the resistance of an adhesive strip. |
[* black] Apply slow and firm pushing pressure to the plastic card. Gently wiggle and twist the card to help it slice through the adhesive. |
[* icon_note] If you are struggling, tilt the iPad, apply a few more drops of adhesive remover and wait a minute before trying again. |
[* icon_note] As you are slicing, the |
[* icon_note] As you are slicing, the |