Skip to main content

Changes to Step #16

Edit by Arthur Shi

Edit approved by Arthur Shi

Deleted
Added
Unchanged

Step Lines

[* black] Slide a plastic card into the bottom edge of the battery until you feel the resistance of an adhesive strip.
[* black] Apply slow and firm pressure to the plastic card, gently wiggling and twisting it as you slice through the adhesive strip.
[* icon_note] If you are struggling, tilt the iPad upiPad, apply a few more drops of adhesive remover and wait a minute before trying again.
[* icon_note] If you are struggling, tilt the iPad upiPad, apply a few more drops of adhesive remover and wait a minute before trying again.
[* icon_note] As you are slicing, the battery blocker may fall out of position. If that happens, reposition the battery blocker before continuing with your work.