Skip to main content

Changes to Step #3

Edit by Arthur Shi

Edit approved by Arthur Shi

Deleted
Added
Unchanged

Step Lines

[* black] Use tweezers or a spudger to gently pull up the Smart Connector end of the black masking tape, whichtape. It covers the mid-battery circuit board residing between the two battery cells.
[* black] Use tweezers or a spudger to gently pull up the Smart Connector end of the black masking tape, whichtape. It covers the mid-battery circuit board residing between the two battery cells.
[* icon_note] You only need to peel the tape back enough to reveal the connector underneath.