Skip to main content

Changes to Step #3

Edit by Arthur Shi

Edit approved by Arthur Shi


Step Lines

[* black] Use tweezers or a spudger to gently pull up the end of the black tape nearest the Smart Connector. It covers the mid-battery circuit board residing between the two battery cells.
[* icon_note] You only need to peel the tape back enough to reveal the connector underneath.
[* red] Remove the 1.7 mm Phillips screw holding the Smart Connector cable cover in place.
[* black] Remove the Smart Connector cable cover.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

No previous image