Skip to main content

Changes to Step #7

Edit by Arthur Shi

Edit approved by Arthur Shi

Deleted
Added
Unchanged

Step Lines

[* black] Use the flat end of a spudger to push the excess tape bounding across the top edgeedge of the batterytape down into the crevicecrevice between the battery and the speaker.
[* black] Use the flat end of a spudger to push the excess tape bounding across the top edgeedge of the batterytape down into the crevicecrevice between the battery and the speaker.
[* icon_note] This creates a tape "wall" which will help prevent any liquid adhesive from pooling behind it.
[* black] Slide the spudger across the entire length of the crevice, pushing tape down to create a lipboundary.
[* black] Slide the spudger across the entire length of the crevice, pushing tape down to create a lipboundary.