Skip to main content

Changes to Step #7

Edit by Arthur Shi

Edit approved by Arthur Shi

Deleted
Added
Unchanged

Step Lines

[* black] Use the flat end of a spudger to push the excess tape bounding across the top edge of the battery down into the crevice.
[* icon_note] This should createcreates a tape "wall" which, while not completely liquid-proof, shouldwhich will help prevent any liquid adhesive from pooling behind it.
[* icon_note] This should createcreates a tape "wall" which, while not completely liquid-proof, shouldwhich will help prevent any liquid adhesive from pooling behind it.
[* black] Slide the spudger across the entire length of the crevice, pushing tape down to create a lip.