Skip to main content

Changes to Step #7

Edit by B0NK3R5

Edit approved by B0NK3R5


Step Lines

[* black] Pic 1 - PCBs removed. Screen assembly and frame only.
[* black] The screen is only held on with some adhesive so (CAREFULLY) pry them apart. There should be nothing else holding them together
[* black] Pic 2 - Screen assembly only.
+[* black] Carefully peel silver tape off of black tape.
+[* black] Starting at the right (in the picture) peel up the black tape. Be careful! The power ribbon cable for the backlight is hidden under at the left side. See next steps for location of connection.