Skip to main content

Changes to Step #9

Edit by pcspecialists

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

-[* black] Be careful when removing LCD and when reassembling tablet. not sure when it happened, but apparently I was not careful enough when putting it back together, and this happened. Works perfectly fine otherwise.
+[* black] Be careful when removing LCD and when reassembling tablet. not sure when it happened, but apparently I was not careful enough when putting it back together, and this happened. Works perfectly fine otherwise. (Heat gun was not used).
+[* icon_caution] It's best to remove all of the adhesive residue from the LCD if you are going to re-use the LCD. Then apply new double sided adhesive (the rubberized kind) for a good "permanent" seal.
+[* icon_note] Be aware there are several different digitizers used in these tablets. If you purchase a replacement digitizer you must get the exact matching part or your digitizer won't work properly.
+[* icon_note] There are also several different revisions of LCD's. Best to get the matching one to avoid any potential problems.