Skip to main content

Changes to this Step

Edit by B0NK3R5

Edit approved by B0NK3R5

Before
After
Unchanged

Step Lines

+[* black] Pic 1 - Overview with PCBs removed.
+[* black] Pic 2 - Frame removed. Screen assembly only.
+[* black] Peel the silver tape off of the black tape.
+[* black] (carefully) Remove the black tape at the bottom starting from the right the ribbon cable to power the backlight is at the bottom left. Be sure not to tear it in the process.
+[* black] Then disconnect the backlight ribbon cable.
+[* black] carefully remove the backlight from the screen assembly. needs to be gently pried from the metal frame. see third pic for hint.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added