Changes to Step #1
Edit by Paul Barnfather —
Edit approved by Paul Barnfather
- Before
- After
- Unchanged
Step Lines
[title] Parts check |
[* black] You will need the following parts: |
[* black] 12V 4Ah battery |
[* black] Rubber battery strap |
[* black] 10A in-line fuse and a selection of crimp or solder terminals |
[* black] 3-phase 12V regulator (Wassell or Podtronics both fine) |
[* black] 3-phase 12V regulator (Wassell or Podtronics both fine) |
[* black] 12V ignition coil |
[* black] 12V bulbs |
[* black] 12V horn (optional) |
Image 1
No previous image
Added