Skip to main content

Changes to Step #1

Edit by Eric D

Edit approved by Eric D

Deleted
Added
Unchanged

Step Lines

[* black] Use a thin piece of plastic, spudger, or fingernail (if you have them) to lift up the edge of the grip, and pull up slowly.
[* black] Repeat for the other two grips
[* icon_note] The large one on the battery-side is the easiest to start with. This is required to remove the front & back panels
[* icon_note] The small one on the back is a bit difficult to get started, but not really difficult to remove.
[* icon_note] The one on the AV panel will be easier if you open up the AV port cover.

Image 1

No previous image

Added