Skip to main content

Changes to Step #12

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

-[* black] Insert a plastic opening tool between the display assembly and the rear case near the top of the iPod.
+[* black] Insert the plastic opening tool between the display assembly and the rear case near the top of the iPod.
[* black] Slightly twist the opening tool to pry the front panel up from the rear case.
[* black] Separate the display assembly from the iPod.
[* icon_caution] Do not try to completely remove the front panel, as it is still connected by several cables.