Skip to main content

Changes to Step #4

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* black] Hold the iPod firmly against a table or bench.
- [* black] Place your thumb and index finger over the lower corners of the display, to stop the screen from opening too far when the adhesive breaks.
-[* black] Rock the suction cup up and back toward the top of the iPod. Be patient, and apply firm constant force until the adhesive breaks and the screen comes up from the rear case.
+ [* icon_note] Place your thumb and index finger over the lower corners of the display, to stop the display from opening too far when the adhesive breaks.
+[* black] Rock the suction cup up and back toward the top of the iPod. Be patient, and pull with firm, constant force until the adhesive breaks and the display comes up from the rear case.
+ [* icon_caution] After the display begins to lift from the rear case, be careful not to lift more than about an inch—a fragile plastic frame still connects the display assembly to the rear case.