Skip to main content

Changes to Step #1

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereicon_note] The battery is secured to the rear case by four pieces of stretch-release adhesive—one on the top cell, and three on the bottom.
[* red] Each piece of adhesive has a black pull-tab at the end, which is lightly adhered to the side edge of the battery
.
[* black] Insert wisdom hereicon_note] The battery is secured to the rear case by four pieces of stretch-release adhesive—one on the top cell, and three on the bottom.
[* red] Each piece of adhesive has a black pull-tab at the end, which is lightly adhered to the side edge of the battery
.

Image 1

Old Version

New Version