Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #6

Edit by lf

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] With the display pulled out of the case as much as possible, gently press the lower edge of the glass panel gently toward the lower rear edgeuntil it pops in 1mm. The top of the nanoglass will not pop off until you perform the next step.
[* black] SlideUse your thumbs on the lower edge of the glass panel slightly(as in picture) to slide the glass down and into the case until the top edge pops up out of the case.
[* black] With the display pulled out of the case as much as possible, gently press the lower edge of the glass panel gently toward the lower rear edgeuntil it pops in 1mm. The top of the nanoglass will not pop off until you perform the next step.
[* black] SlideUse your thumbs on the lower edge of the glass panel slightly(as in picture) to slide the glass down and into the case until the top edge pops up out of the case.