Skip to main content

Changes to Step #5

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] Slide the tip of the opening pick from the bottom right corner along the side of the S9.
+ [* icon_caution] [guide|25705|Reuse an iOpener|new_window=true] if the adhesive becomes hard to cut. During the removal process the back cover is under tension all the time and is likely to break if the adhesive isn't loose enough.
+[* black] Slide the opening pick around the top right corner of the S9 and cut the remaining adhesive at the top of the phone.
+[* icon_caution] Don't open the phone all the way yet. The flex cable of the fingerprint reader is still connected to the motherboard.