Skip to main content

Changes to Step #3

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch

Deleted
Added
Unchanged

Step Lines

[* icon_note] If the phone's rear glass is cracked, the suction cup may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction cup in place and allow it to cure so you can proceed.
[* black] Use a small suction handle to create a gap at the bottom end of the Galaxy S9.
[* black] Insert an opening pick in the gap and slide it to the bottom right corner.
[* black] Insert an other opening pick and slide it to the bottom left corner.
[*
black] Insert wisdom herea third opening pick to prevent the adhesive from resealing during the removal procedure.
[* icon_note] If the phone's rear glass is cracked, the suction cup may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction cup in place and allow it to cure so you can proceed.
[* black] Use a small suction handle to create a gap at the bottom end of the Galaxy S9.
[* black] Insert an opening pick in the gap and slide it to the bottom right corner.
[* black] Insert an other opening pick and slide it to the bottom left corner.
[*
black] Insert wisdom herea third opening pick to prevent the adhesive from resealing during the removal procedure.