Skip to main content

Changes to Step #2

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

+[* icon_note] The next two steps demonstrate the iSclack, a handy tool that we recommend for anyone doing frequent repairs. ***If you aren't using the iSclack, skip down two steps for an alternate method.***
+[* black] If the plastic depth gauge is attached at the center of the iSclack, remove it now—it's not needed for larger phones like the iPhone XR.
+[* black] Position the suction cups near the bottom edge of the iPhone—one on the front, and one on the back.
+[* black] Press both suction cups firmly into place.
+ [* icon_note] If your display or back glass is badly cracked, covering it with a layer of clear packing tape may help the suction cups adhere. The iSclack also includes two pieces of tape for this purpose.

Image 1

No previous image

Added

Image 2

No previous image

Added