Skip to main content

Changes to Step #5

Edit by DaddyKitty04

Edit approved by Justin Ogihara

Before
After
Unchanged

Step Lines

[* black] Use iFixit plastic picks to pry away the LCD from the bask assembly.
-[* icon_note] This process will take a bit due to the glue thats holding the LCD and back assembly together. Slowly move around the edge go the screen to loosen the glue up.
-[* icon_note] If you have a heat gun, you can use the heat gun heat up the glue. That will make the use of the plastic picks easy to pry the pieces apart.
+[* icon_note] This process will take a while due to the glue that's holding the LCD and back assembly together. Slowly move around the edge around the screen to loosen the glue up.
+[* icon_note] If you have a heat gun, you can use it to heat up the glue. Heating up the glue makes it easier to separate the LCD and back assembly apart.