Skip to main content

Changes to Step #5

Edit by The Dark Night part 2

Edit approved by The Dark Night part 2

Before
After
Unchanged

Step Lines

+[* black] Use iFixit plastic picks to pry away the LCD from the bask assembly.
+[* icon_note] This process will take a bit due to the glue thats holding the LCD and back assembly together. Slowly move around the edge go the screen to loosen the glue up.
+[* icon_note] If you have a heat gun, you can use the heat gun heat up the glue. That will make the use of the plastic picks easy to pry the pieces apart.

Image 1

No previous image

Added

Image 2

No previous image

Added