Skip to main content

Changes to Step #3

Edit by vet121

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

[* red] Take a plastic pry tool and work towards the top right of the LCD ribbon cable to pry the cable from the logic board.
[* icon_caution] Do not use a metal pry tool. Metal pry tools can cause damage to the logic board and to the ribbon cable.
-[* icon_note] This cable send signal from the logic board to the LCD screen.
+[* icon_note] This LCD ribbon cable sends signal from the logic board to the LCD screen.
[* black] Once unplugged move the cable aside.