Skip to main content

Changes to Step #2

Edit by vet121

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

[* black] Take the plastic Spudger tool to pry open the LCD ribbon cable cover.
-[* icon_caution] This part might be a little hard to open. Take your time and be careful not to push too hard, so there's no damage to the ribbon cable
-[* icon_note] Once the cover is remove, place the cover aside so its not miss placed
+[* icon_caution] This part might be a little hard to open. Take your time and be careful not to push too hard as doing so could result in damage to the ribbon.
+[* icon_note] Once the cover is removed, place the cover aside so its not misplaced