Skip to main content

Changes to Step #1

Edit by Robert Metcalfe

Edit approved by Robert Metcalfe

Before
After
Unchanged

Step Lines

[* black] This is the back of the device and where you will begin to take it apart.
[* black] It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.
[* black] Use the Flat 1.5 screw driver to pop up the corner of the silver piece.
-[* red] Use the plastic opening tools to pry along the edges of the silver piece.
+[* black] Use the plastic opening tools to pry along the edges of the silver piece.
[* black] Lift up the silver piece to reveal the rest of the back cover.