Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #3

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[title] Remove the factory RAM modules
[* black] Remove the rubber stabilisersTwo clips secure each RAM module in place, one on each side ofside. Using your fingers, spread the RAM modules.
[* black] Press down the spring
clips on either end ofaway from the RAM modules. The modulemodule.
[* icon_note] When released, the RAM modules
will then 'pop' out, then you can remove it.
[* black] Put the new module in
pop up at an angle to the RAM socket (firmly inserted so it's snug), then push it back into the clip until you hear a satisfying clickslight angle.
[* black] Remove the rubber stabilisersTwo clips secure each RAM module in place, one on each side ofside. Using your fingers, spread the RAM modules.
[* black] Press down the spring
clips on either end ofaway from the RAM modules. The modulemodule.
[* icon_note] When released, the RAM modules
will then 'pop' out, then you can remove it.
[* black] Put the new module in
pop up at an angle to the RAM socket (firmly inserted so it's snug), then push it back into the clip until you hear a satisfying clickslight angle.

Image 1

Old Version

New Version

Image 2

No previous image

Added