Skip to main content

Changes to Step #4

Edit by Keenan Barber

Edit approved by Keenan Barber

Before
After
Unchanged

Step Lines

-[* black] Unscrew the two black 3 mm screws with the T7 torx.
-[* black] Remove the two silver 4 mm screws with the T7 torx again.
+[* black] Unscrew the following screws holding the logic board in place using the T7 torx:
+ [* red] Two black 3 mm screws
+ [* orange] Two silver 4 mm screws

Image 1

Old Version

New Version