Skip to main content

Changes to Step #1

Edit by Keenan Barber

Edit approved by Keenan Barber

Before
After
Unchanged

Step Lines

-[* black] Use a spudger to pry the bottom panel off from the body. It is held on with clips on the inside, so you will need to make sure to undo those.
+[* black] Use a spudger to pry the bottom panel off from the body. It is held on with clips on the inside, so you will need to make sure those are undone while opening.
[* icon_note] The panel is held onto the device tightly, so you may need to be a bit forceful to remove it.