Changes to Step #4
Edit by Tobias Isakeit —
Edit approved by Tobias Isakeit
- Before
- After
- Unchanged
Step Lines
| [title] cleaning the motherboard | |
| - | [* black] carefully scrape off with opening tool or spudger. |
| - | [* black] Dap with a Q-tip soaked with isopropyl alcohol (>97%). |
| + | [* black] Carefully scrape off the thermal pads and the remains with an opening tool or a spudger. |
| + | [* icon_caution] Make sure you do not press the thermal pads in between small components as it is very cumbersome to get them out afterwards. Also apply only little pressure to not damage any components on the motherboard in case you might slip. |
| + | [* black] You might want to clean any remaining residue with a Q-tip and some isopropyl alcohol (>97%). Be sure to only dab on the small components so the fibers of the Q-tip won't get caught. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added