Changes to Step #3
Edit by Tobias Isakeit —
Edit approved by Tobias Isakeit
- Before
- After
- Unchanged
Step Lines
| [title] cleaning the frame | |
| [* icon_note] If you are replacing the frame (e.g. in a display assembly with frame guide) you can skip this step since your new part should be clean. | |
| [* black] Scrape off the old thermal pads with an opening tool or a spudger. | |
| + | [* black] If you want to go the extra mile you can clean the rest with a Q-tip and some isopropyl alcohol (>97%). |
Image 1
Old Version
New Version
Image 2
Old Version
New Version
Image 3
Old Version
New Version