Skip to main content

Changes to Step #3

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

-[* icon_note] Open the MacBook Pro a little wider than 90 degrees, and place it on end on the table, as shown.
-[* red] While holding the display with your left hand remove the three T8 Torx screws from the upper display bracket.
-[* icon_caution] Be sure the display and upper case are balanced and will not fall over, potentially damaging other components.
+[* icon_note] Fully open the screen and stand your MacBook Pro up on one side.
+[* red] While steadying the MacBook pro with your free hand, remove the three T8 Torx screws from the lower display hinge.
[* orange] Remove the remaining three T8 Torx screws from the lower display bracket.

Image 1

Old Version

New Version

Image 2

Old Version

New Version