Skip to main content

Changes to this Step

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch


Step Lines

+[title] Lower Case Removal MacBook Pro 13" 2016 Touch Bar.
+[* icon_caution] Before proceeding, unplug and power down your MacBook. Close the display and lay it on a soft surface, top-side down.
+[* black] Use a P5 Pentalobe driver to remove the six screws securing the lower case:
+ [* red] Two 6.2 mm screws
+ [* orange] Four 3.4 mm screws
+[* icon_reminder] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your device.

Image 1

No previous image