Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #9

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereApply even pressure over the whole adhesion surface for at least 30 seconds to strengthen the bond.
[* black] For maximum bond strength on external-facing components (like displays and covers), you can leave the adhesive under pressure overnight.
[* black] [https://d3nevzfk7ii3be.cloudfront.net/igi/CvgAu6AgiFyScFWV.huge|Leaving the phone under a stack of books|new_window=true] is a good way to do this—just make sure the books apply even pressure to the entire bond. You may need some kind of spacer to allow the books to lay flat
.
[* black] Insert wisdom hereApply even pressure over the whole adhesion surface for at least 30 seconds to strengthen the bond.
[* black] For maximum bond strength on external-facing components (like displays and covers), you can leave the adhesive under pressure overnight.
[* black] [https://d3nevzfk7ii3be.cloudfront.net/igi/CvgAu6AgiFyScFWV.huge|Leaving the phone under a stack of books|new_window=true] is a good way to do this—just make sure the books apply even pressure to the entire bond. You may need some kind of spacer to allow the books to lay flat
.