Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #7

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

[title] Application and Installation
[* black] Before applying any adhesive, make sure your replacement part fits, and that all connectors will connect to their respective sockets correctly without putting too much stress on their cables.
[* black] If it is possible and safe to do so, power on your device with everything connected to check that the replacement part functions.
[* black] Having verified that everything works correctly, power off the device and continue.
[* black] Apply the correct adhesive shape for your repair.
[* black] When applying adhesive strips, make sure to apply one end first, then use a finger or the flat end of a spudger to smooth the rest of the strip as you lay it down, squeezing out any air bubbles.
[* black] PeelUse a pair of tweezers to peel the backing off the adhesive and carefully install the replacement partadhesive.
[* black] PeelUse a pair of tweezers to peel the backing off the adhesive and carefully install the replacement partadhesive.