Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

[title] Surface Preparation
[* black] Begin by removing all the old adhesive, glass, and any other debris from all adhesion surfaces.
[* icon_note] You can pull the adhesive off with tweezers or your fingers, [https://d3nevzfk7ii3be.cloudfront.net/igi/omScJRSckUhIpVcT.huge|roll it up on the tip of a spudger|new_window=true] with a roll-and-pull motion, or scrape it off with the flat end of a spudger.
[* black] After removing most of the adhesive, scrape with the tip of a spudger to get small bits of adhesive out of tight spaces.
[* icon_caution] When working around a battery, be extremely careful not to accidentally puncture or bend the battery.