Changes to Step #1
Edit by Adam O'Camb —
Edit approved by Adam O'Camb
- Before
- After
- Unchanged
Step Lines
| [* black] Begin by removing all the old adhesive from all adhesion surfaces. |
| [* icon_note] You can pull the adhesive off with tweezers or your fingers, [https://d3nevzfk7ii3be.cloudfront.net/igi/omScJRSckUhIpVcT.huge|roll it up on the tip of a spudger|new_window=true] with a roll-and-pull motion, or scrape it off with the flat end of a spudger. |
| [* black] After removing most of the adhesive, scrape with the tip of a spudger to get small bits of adhesive left in tight spaces. |
| [* icon_caution] When working around a battery, be extremely careful not to accidentally puncture the battery with your spudger. |