Skip to main content

Changes to Step #3

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

+[* black] Use a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board.
+ [* icon_note] Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.
+[* black] Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

Image 1

No previous image

Added

Image 2

No previous image

Added