Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #2

Edit by Taylor Dixon

Edit approved by Taylor Dixon

Before
After
Unchanged

Step Lines

[* black] Insert an Opening Pickopening pick under the lower side of the back panel (opposite the R and ZR buttons).
[* black] Insert an Opening Pickopening pick under the lower side of the back panel (opposite the R and ZR buttons).
[* black] Slide the flat edge of an opening pick up the side of the Joy-Con.
[* icon_note] Be careful not to slide the Opening Pickopening pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens fairly easily, so not much pressure is needed.
[* icon_note] Be careful not to slide the Opening Pickopening pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens fairly easily, so not much pressure is needed.